These wraps are fitted for the top of your 40oz handled tumblers. They are scratch proof, waterproof and permanent.
Application Instructions:
1. Make sure surface is clean using soap and water. 2. We recommend watching a YouTube video or two to learn how to apply, we found success using the "hinge method". 3. Using a soft cloth or squeegee, press the film pushing out any air bubbles. 4. Peel clear top film slowly and at an angle making sure design is sticking to the surface. 5. If you notice the design not sticking to the surface, place film back down and rub till the design sticks to the surface. 6. Excess glue can be cleaned off with soap and water once design cures for 24 hours.
CAUTION! Ensure your wrap is lined up before removing the backing. Adhesive is VERY strong, once the glue touches the surface, do NOT attempt to remove.
*Please note that not all brands of tumblers have the exact same measurements.
Please be aware that we are not responsible for any UV DTF transfers that are applied incorrectly or damaged during the application process. While we strive to provide excellent customer service and ensure the highest quality products, we cannot be held liable for any mishaps that may occur during the application.
For this reason, we do not accept returns or offer refunds on cup wraps. We encourage you to make an informed decision before purchasing and reach out to us if you have any questions or concerns.
